SE4
Files for download
SE4
- Czech instruction manual (version 1.03)
- English instruction manual (version 1.03)
The Servo Expander SE4 is a device that converts serial bus signal to standard PWM servo outputs. It offers up to four configurable servo outputs with optional period and fail-safe setting. The SE4 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver using just a single cable.
| Weight [g] | 4 |
| Dimensions [mm] | 34 x 14 x 9 |
| Continuous current [A] | 15 |
| Max. current (2s) [A] | 60 |
| Telemetry | JETI Duplex, Multiplex, Graupner Hott, Futaba S.Bus, PowerBox P2Bus |
| Operational temperature [°C] | -20 – 85 |
| Supply Voltage [V] | 4 – 14 |
| Number of channels | 4 |
| Receiver inputs | 1 |
| Battery inputs | 1 |
| Voltage regulation | No |
| Flight stabilization | No |
Supported protocols:
- Futaba: S.Bus/S.Bus2
- Graupner: SUMD, Hott telemetry for setting
- JETI: EX Bus
- Multiplex: SRXL 12ch, SRXL 16ch
- PowerBox: P2Bus
Features
- Small dimensions and high current throughput via the integrated MR30 power connector.
- 4-channel servo/EX Bus sensor expander.
- Automatic detection of serial data/telemetry after startup.
- Configuration through the transmitter, external terminal (JETIBOX/SMART-BOX) or MAV Manager PC software.
- Firmware updates via USB interface.
