IBEX 80HV
Files for download
Opto controllers: Instruction manual
- Czech instruction manual (version 2.05)
- English instruction manual (version 2.05)
Speed controllers: Common info
- Firmware changelog (downloadable using MAV Manager)
- Description of the extension ports
- Recommended controller settings for various RC-model types
FrSky Telemetry Apps
- FrSky Ethos compatible Lua apps (08/2024 - compatible with ESC 2.05)
- App installation guide
High-power speed controller for BLDC motors offers continuous current up to 80A at a voltage of up to 51V (12S LiPo). Using a special firmware, we offer the optional starter or starter-generator mode.
Replaced by: IBEX 80X
| Weight [g] | 60 |
| Dimensions [mm] | 57 x 35 x 28 |
| Continuous current [A] | 80 |
| Max. current (2s) [A] | 120 |
| Telemetry | Duplex EX, Hott, MSB, S.Bus2, SRXL2 |
| Operational temperature [°C] | -10÷110 |
| Supply Voltage [V] | 8 – 51V |
| Batteries LiXX | 3 – 12 |
| Cable crossection (input/output) [mm²] | 4 / 2.5 |
Features
- Small dimensions combined with high power motor control.
- Over- and undervoltage protection, overtemperature protection, motor-stall protection.
- Configurable current limiter.
- Optically isolated throttle input.
- Safety shutdown when the throttle impulse is lost.
- Configurable acceleration, timing, electromagnetic brake etc.
- Low acoustic noise due to high frequency switching.
- Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2. Alternative firmware with Spektrum SRXL2 telemetry support.
- Telemetry (RC system dependent): voltage, current, power, capacity, temperature, RPM, energy.
- Telemetry min/max values are logged.
- Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
- Firmware updates via USB interfaceusing the MAV Manager software.
- Languages: CZ/DE/EN/FR/IT.
Additional functions
- Option to activate the synchronous rectification (Active Freewheeling) for more accurate motor response and less heating of the controller during aerobatics.
- Flawless operation with high power multi-pole motors and the vast majority of all other motor types.
- Propeller positioning using a Hall sensor.
- Optional external motor identification chip combined with a temperature sensor.
